Substantial posts by redeye, who started the thread, and by the forum’s most active contributors. 11 of 35 posts are listed.
Page 1
redeye, 13 May 2007Before the walls go up , boarded up windows with 18mm MDF filled with insulation. Some of the windows are bricked up from the outside already, and will brick up/fill the…
redeye, 17 May 2007Used the channels that were already dug, for any future wireing changes in the rehearsal rooms. It took a couple of days to dig them out then fire in some plasic pipe,…
redeye, 21 May 2007Hi, is there anybody there??? Im about to start building the walls ceilings on my project and im getting the jitteres about a few things. Im trying to answer all of my…
redeye, 21 May 2007the walls wil be 3m high metal studs on top of 10mm rubber on top of a concrete floor. the ceiling spanned accros these walls with 2 layers of plaster board on the…
redeye, 27 May 2007Made the walls on the floor and double sheeted, taped and sealed both layers. The biggest was 3.6m long and very heavy. Managed to get 5 seperate walls up in a day…
redeye, 29 May 2007Hi Sharward, Ill give the pipes a good test now, not to be sorry later. Hopefully with only a snake and some returns to go around 2 bends (4" pipe) and have the other 2"…
redeye, 29 May 2007hi medboyle, To seal the joins Im planning to do that on the inside of the rooms by cutting MDF to make a box shape linking the 2 walls.i.e. Screw through the nearest…
redeye, 6 June 2007The pics. Had me first session with the acoustic sealant, takes ages, I do hope its worth the effort/cuts on fingers (lots of screws poking about ouch). and how quickly…
Page 2
camistan, 21 June 2007Hey Redeye, I was looking at your pics particuarly the one with your door frame. I'm not sure if having steel studs makes the difference but you need to add 2 king studs…
redeye, 23 June 2007Hi Nikodemos, I am keeping to the 2 leaf system where possible, so with the outer brickwalls as the first leaf then plasterboard on the outside of the studs as the…
camistan, 23 June 2007Hey Redeye, I'm not so sure it's the 6x2 frame as much as it is the king studs being attatched to the jack stud, being attatched to your door jamb. I would think it's…