Substantial posts by AndreasB, who started the thread, and by the forum’s most active contributors. 18 of 37 posts are listed.
Page 1
AndreasB, 25 February 2006Hi, I'll just post some pics and comments of the construction of the studio I'm currently building, some earlier posts to this is…
AndreasB, 25 February 2006and here's the startingpoint of the walls.. one showing the rubber that the walls are resting on.. I haven't been taking any more photo's since this last one but I…
AndreasB, 2 April 2006no update for a month, just got back from Japan but started working on the construction again. Finsished most part of the Insulation, 95mm Roxull and started to put the…
AndreasB, 3 April 2006Check my other threads in the beginning of this one or just go to http://www.vibratec.se/ and download a catalog. I got the impression that the system called CDM is sold…
AndreasB, 3 April 2006so the final two pictures for this session; One is showing one out of two ventilation inlets/outlets that I've been consider getting fitted into the ceiling..but perhaps…
AndreasB, 4 April 2006err, well I could do that, it's just a matter of money, as always, but perhaps I do that. The frame I bought is buildt for two layers of 13mm gyproc so that would work…
AndreasB, 4 April 2006Yup that's the ones I've used, they're sure flexible so you have to be rather strong or preferrably two people getting them fixed without slacking too much. :shock: you…
AndreasB, 28 June 2006update, without pic's :roll: The ceiling is now finished and the first layer of gypsum is up (thank god for panel-lifters). I have now decied (and ordered) a new…
AndreasB, 16 August 2006Update (slow progress here, I know, not beeing lazy though) Got a Whirlwind 12/4 snake installed and tested, Installed all three doors and did a Sound Test after the…
AndreasB, 19 August 2006Ok, here's some picture of the progress: This is one pretty bad shot of the second gypsum layer External image, not preserved — original:…
AndreasB, 20 August 2006haha, well, it's for the booth. :lol: Tomorrow I'll install the new floor and do the last touches on the walls. But the real big challange is the ceiling; I'm…
AndreasB, 20 August 2006As the LR is soon done I move on to the CR and I have this idea: External image, not preserved — original: http://www.kunst.no/berthling/studio/a-cr.jpg Is this a good…
AndreasB, 21 August 2006Roughly 3.2 meters, but I could go as far as 3.8. Sorry, I should post the room size again of course.. the CR's maximum size is 4150 mm x 4820 mm but the angling of…
AndreasB, 10 March 2007ok, here we go! I got my arm back after 3 months in a cast locking my thumb in position. It feels great beeing free again.. but as some of you know I couldn't wait for…
Page 2
AndreasB, 13 March 2007Thanks! No, the monitors are almost in position, they'll be lying down and be somewhat tilted forward to get in right position ('le sweetie spot, as the french call it…
AndreasB, 14 March 2007Just got back from the woodshop and of course I forgot to bring my camera (argh, kill me), but since I just got out of the cast I've been captive in for the last three…
AndreasB, 15 March 2007thanks camistan. and here as promised some pictures of the ceiling frames. this is the woodshop I'm working in, we mainly do furniture but specialise in interiors for…
AndreasB, 17 March 2007ok, got all the frames to the studio and startet inserting the isolation. External image, not preserved — original: http://www.kunst.no/berthling/studio/panel1.JPG…