Hi
Do you have experience with the material cork to reduce reflexions? Eventually this may be a good material even for low frequencys?
Thanks
Olivier
What about cork?
-
Ethan Winer
- Senior Member
- Posts: 1063
- Joined: Fri Feb 21, 2003 3:50 am
- Location: New Milford, CT, USA
- Contact:
Re: What about cork?
Olivier,
> Do you have experience with the material cork to reduce reflexions? <
I have no direct experience with cork, but I'm pretty sure it's not a very good absorber. Certainly not as good as rigid fiberglass which is more commonly used.
--Ethan
> Do you have experience with the material cork to reduce reflexions? <
I have no direct experience with cork, but I'm pretty sure it's not a very good absorber. Certainly not as good as rigid fiberglass which is more commonly used.
--Ethan
-
John Sayers
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact:
Olivier - I've had experience with cork back in the late 60s early 70s when it was the main acoustic treatment in the studios of the time here in Australia.
We used to use sheets of dark brown cork that was 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber.
For those who don't wish to have fibreglass in their rooms because of it's toxic effect (which it isn't but some think it is) it's a reasonable alternative - looks good too
I am a fan of cork floors though - they wear extremely well, especially around heavy areas like the console and it has some give so cups, glasses and expensive gear doesn't break when dropped.
cheers
john
We used to use sheets of dark brown cork that was 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber.
For those who don't wish to have fibreglass in their rooms because of it's toxic effect (which it isn't but some think it is) it's a reasonable alternative - looks good too
I am a fan of cork floors though - they wear extremely well, especially around heavy areas like the console and it has some give so cups, glasses and expensive gear doesn't break when dropped.
cheers
john
-
Gogolo
- Posts: 2
- Joined: Fri Mar 18, 2005 9:04 am
-
Ethan Winer
- Senior Member
- Posts: 1063
- Joined: Fri Feb 21, 2003 3:50 am
- Location: New Milford, CT, USA
- Contact:
John,
> 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber. <
Thanks for clarifying. The cork I usually see is a very thin veneer meant to be put over a normal wall for appearance only.
--Ethan
> 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber. <
Thanks for clarifying. The cork I usually see is a very thin veneer meant to be put over a normal wall for appearance only.
--Ethan
-
John Sayers
- Site Admin
- Posts: 5462
- Joined: Mon Jan 27, 2003 12:46 pm
- Location: Australia
- Contact: