What about cork?

How to use REW, What is a Bass Trap, a diffuser, the speed of sound, etc.

Moderators: Aaronw, sharward

Gogolo
Posts: 2
Joined: Fri Mar 18, 2005 9:04 am

What about cork?

Post by Gogolo »

Hi

Do you have experience with the material cork to reduce reflexions? Eventually this may be a good material even for low frequencys?
Thanks
Olivier
Ethan Winer
Senior Member
Posts: 1063
Joined: Fri Feb 21, 2003 3:50 am
Location: New Milford, CT, USA
Contact:

Re: What about cork?

Post by Ethan Winer »

Olivier,

> Do you have experience with the material cork to reduce reflexions? <

I have no direct experience with cork, but I'm pretty sure it's not a very good absorber. Certainly not as good as rigid fiberglass which is more commonly used.

--Ethan
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

Olivier - I've had experience with cork back in the late 60s early 70s when it was the main acoustic treatment in the studios of the time here in Australia.

We used to use sheets of dark brown cork that was 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber.

For those who don't wish to have fibreglass in their rooms because of it's toxic effect (which it isn't but some think it is) it's a reasonable alternative - looks good too :)

I am a fan of cork floors though - they wear extremely well, especially around heavy areas like the console and it has some give so cups, glasses and expensive gear doesn't break when dropped.

cheers
john
Gogolo
Posts: 2
Joined: Fri Mar 18, 2005 9:04 am

Post by Gogolo »

Thank you for your answers. I too like the feeling of cork - but the problem is, that cork has a negative eco-balance (as we say in Switzerland :-), I was told. So maybe Im looking for other materials like cotton or flax (shall be a very good absorber).

Thanks again, greetings Olivier
Ethan Winer
Senior Member
Posts: 1063
Joined: Fri Feb 21, 2003 3:50 am
Location: New Milford, CT, USA
Contact:

Post by Ethan Winer »

John,

> 1" thick and came in sheets 2' x 1' but it was also available in 2" and 3" thickness. Obviously the thicker the better but normal 1" has a NRC of around .85. So it's a reasonable absorber. <

Thanks for clarifying. The cork I usually see is a very thin veneer meant to be put over a normal wall for appearance only.

--Ethan
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

Yes, Ethan - most people don't realise it's available in thicker sizes. Now that we are dropping the wine corking and going to screwtop there should be plenty on the market. It can look very nice as a wall treament and its easy to lift it off the wall for greater depth.

cheers
john
Post Reply