New Building
-
jrbass62
- Posts: 1
- Joined: Mon Jul 20, 2015 8:33 am
- Location: Starke Fl.
New Building
I'm going to build a new rehearsal/recording studio building on my property.I have 20 acres of pasture in Starke Fl. There is already a 200 amp service there. I put in a few years ago, as well as a well and septic.I'm going to pour a concrete slab and build wood walls,and have trusses built for the roof. I have no idea about what I need to build for it to sound/perform for what I want..There will be full band rehearsals/recording. I was thinking about a 30ft.x 30ft. square building.And build the inside to whatever it takes. My recording will be computer based,I am open to any suggestions..Thanks..JR. 
-
stevev
- Senior Member
- Posts: 307
- Joined: Wed Jul 15, 2009 11:16 pm
- Location: Trentham,Vic, Australia
- Contact:
Re: New Building
my suggestions as follows:
all the best,
Steve
do some research of your own. there's a lot of information on this forum and elsewhere.jrbass62 wrote:I have no idea about what I need to build for it to sound/perform for what I want
also do some research of your own.jrbass62 wrote:I was thinking about a 30ft.x 30ft. square building
read the 'before you post' thread at the top.jrbass62 wrote:,I am open to any suggestions.
all the best,
Steve
quick, cheap or good....pick any two.
-
Soundman2020
- Site Admin
- Posts: 11938
- Joined: Thu Aug 21, 2008 10:17 am
- Location: Santiago, Chile
- Contact:
Re: New Building
I agree with Steve entirely: First, please read the forum rules for posting (click here). You seem to be missing a couple of things!
And second, since you are aren't at all sure what you want or how to go about building it, you should probably consider hiring a studio designer to design the place for you. Send a Private Message to John himself, and ask him to quote for doing that.
- Stuart -
And second, since you are aren't at all sure what you want or how to go about building it, you should probably consider hiring a studio designer to design the place for you. Send a Private Message to John himself, and ask him to quote for doing that.
- Stuart -