Substantial posts by Kirkyb, who started the thread, and by the forum’s most active contributors. 13 of 32 posts are listed.
Page 1
Kirkyb, 3 April 2013Hi all!! This is my first post on this forum so go easy on me :) . I am looking to build a studio in my back garden and need all the help i can get! In this studio i…
Soundman2020, 8 April 2013Hi Kirk, and welcome! You are certainly in the right place, then! That's what the forum is all about: helping people build design and build their studios. So when you…
Kirkyb, 10 April 2013Hi Stuart!! Thanks for the reply. Level wise i wont be going over 95db. It's a new build so i was thinking of using dense concrete blocks for the exterior walls, and 2x4…
Soundman2020, 11 April 2013If you build your inner-leaf like that, with a separate stud frame isolated from the concrete blocks, then you do not need the resilient channel. The separate frame…
Kirkyb, 13 April 2013Thanks for the all the advise Stuart! I have spent some time with room dimensions and came up with 5.7m x 4.23m x 3m which is a ratio of 1:1.4:1.9 Loudens best ratio.…
Kirkyb, 18 April 2013Just a quick update, i have the listening position 60 degrees triangle and the soffits angled at 30 degrees. i phoned adam audio yesterday and they will email me the…
Soundman2020, 26 April 2013To be honest, that's kind of what I expected from Adam. I love their speakers, and highly recommend them, and I even own some myself, but the documentation is poor, at…
Kirkyb, 14 May 2013Hey Stuart! They don't have the information to hand but will get someone to do it which should take a couple of weeks. On another matter as im only permitted to go 2.5…
Kirkyb, 15 May 2013If they do not provide the info, can i still go with a rfz design? I'm off to dig a big hole in my garden to check the water level :) , then i will pay the structual…
Soundman2020, 24 June 2013Me either! That's not what I expect from a diagram for dispersion angle.... Doesn't even say if that is vertical or horizontal! :shock: What I was hoping for is a set of…
Kirkyb, 23 March 2014Hey guys! Been away for awhile work and family commitments! I finished the digging last year August (see photos attached), have ordered dense blocks, buildings sand,…
Kirkyb, 7 April 2014[/quote] Thanks Stuart appreciate that, I've been reading the forum on soffit mounting and ray tracing for quite some time now :) I've got a few questions for you guys.…
Page 2
Kirkyb, 8 October 2018Progress pictures! Image not preserved: Block and Beam Roof.jpg Image not preserved: Corner 4.jpg Image not preserved: Corner 3.jpg Image not preserved: Corner 2.jpg…