Key posts: [g-sun design build] A small studio, Norway

Substantial posts by G-Sun, who started the thread, and by the forum’s most active contributors. 13 of 29 posts are listed.

Page 1

  • G-Sun, 5 October 2012I'm merging all my threads into this one, hopefully making it easier for you (and me) to follow. Please comment only in this thread :) Recovered from web.archive.org —…
  • G-Sun, 5 October 2012Old plan: Recovered from web.archive.org — originally hosted at http://4.bp.blogspot.com/-7kTT9N3ZQsg/UFMOrUrz6fI/AAAAAAAAAIY/almWsQNFse8/s320/Lydstudio,+indre,+iso.png
  • G-Sun, 7 October 2012From thread [G-Sun] Roof-structure : viewtopic.php?f=2&t=17848 Thank you very much xSpace for your warnings. Yes, my initial plans had the original joists place, just…
  • G-Sun, 7 October 2012From thread [G-Sun] Is this wall good enough? : viewtopic.php?f=2&t=17826 Thank you xSpace for pointing this out (as Roguejackal and Soundman2020 )! I've made an updated…
  • G-Sun, 9 October 2012From thread Studio flooring viewtopic.php?f=2&t=17820 Floor: I'm still not confident about heating in heat-insulation for the floor. Following Soundman2020s suggestions,…
  • xSpace, 11 October 2012Depending on what type of material you are installing to the exterior, you could install it directly over the existing exterior sheathing and close the open holes that…
  • G-Sun, 14 October 2012I've made some new drawings for an outer roof structure Struktur-3_1_w700.png Struktur-3_2_w700.png This seems relatively easy to do, while hopefully give enough…
  • G-Sun, 14 October 2012Wolffman was kind enough to share of his expertise and come with a few ideas ( this post ). I'm excited about his ridge beam idea, shown in his drawing here: Recovered…
  • xSpace, 14 October 2012It is still an accident waiting to happen. You cannot alter this structure just because you want to or because "Tod from the Internet" gives his blessing. It is still…
  • G-Sun, 14 October 2012Mm. I get you. I want the structure to be safe for myself and for future users I will. Thanks! I will (Except I bought two doors) Ok, I'll not take this lightly. I can…
  • G-Sun, 15 October 2012What is best: My inner length of the room is 4176mm (with 15mm space between inner and outer studs) I can adjust the width of the room to 3546mm - 3616mm (15-50mm…
  • G-Sun, 15 October 2012I'm starting to believe the sub-roof-plates are 3mm or something (it's hard to see but it seems so). Together with the corrugated galvanized iron, it's not good enough…

Page 2

  • G-Sun, 16 October 2012Or build a new house on another spot. I had in mind a budget of 10-30 000 NOK ($1640-$4920), but as it looks now I don't know if/how to finance this. One thing was if I…