I'm still trying to figure out what to do with my basement studio design. I think I have it somewhat narrowed down to the below. For a little more info http://www.johnlsayers.com/phpBB2/viewtopic.php?t=1411
Please let me know if you see any problems but I think this may be the one I'll go with because of the reasons in previous post.
Thanks
Ron
Another try
Originally posted at johnlsayers.com, topic 1432.
Yeah- that's similar to what Dave suggested I think??
It's tight - but it could work for you. Is it possible to widen the control room a bit - like 1 foot either side would make a significant difference - how tight can you go to the HVAC unit??
cheers
John
Good memory John.. yes thats one of the versions Dave came up with earlier. I've just ran into some trouble with the locations of the HVAC/ducts and such so I had to tweak on a little bit more.
I did move the wall over per your suggestion just about as close as I can now to the HVAC. There is a return pipe coming in that I have now shown in the pic.
What are your thoughts? Any better or should I be barking up another tree?
Thanks again for all the efforts!!
Ron
Yeah - that looks better ;)
cheers
john
Great!! Thanks Johns for the thumbs up. That will be the one I run with then.
Ron