Substantial posts by rnelson, who started the thread, and by the forum’s most active contributors. 8 of 20 posts are listed.
Page 1
rnelson, 19 July 2009I started building a studio about 3 years ago and, for various reasons, put it on hold......I'm ready to start it again but need to do things a little different and need…
rnelson, 19 July 2009Well, after giving this more thought overnight and today, I think my flooring is going to be my weakest link, so here's what I think I need to do. I think doing RSIC /…
rnelson, 21 July 2009Went and got my building permit today....better late than never.......one of the inspectors is coming out tomorrow to talk over the whole project and just get a general…
rnelson, 21 July 2009Got a second opinion from a builder that works for a local company here called Harris Acoustics.......they also work with and sell Hat Channel and RC......so I have a…
rnelson, 20 August 2009XSpace, Well, I've had a couple more people mention the insulation/rafters/soffit issue.....I think what I'm going to have to do is open up the airway above the soffit…
rnelson, 21 August 2009Right now I have a 44" knee-wall on the east wall of my studio.......the west wall currently goes all the way to the floor......should I leave it as is, knee-wall it but…
rnelson, 22 August 2009Well, I took another good long look around the studio and I think I've came to a few decisions...... 1) I've thought about pulling up the flooring and doing some sort of…
xSpace, 22 August 2009I have seen the use of rigid insulation, owens corning 703 and comparables, as being a way to decouple a floor from the structure. This isn't something I have tried so I…