HI John:
I still have a couple of questions:
I have 3 each dual pane glass panels 4' x 7.5'
for the window between studio and control room
my concern is I believe that the glass in the panels
is of the same thickness, if this is not an issue to be
concerned over would placeing the two most outter
panels paralell and the third panel between them at
an angle be OK or overkill.
regarding the walls:
5/8 drywall (doubled) on each side of wall using steel
studs staggered 24' on center w fiberglass insulation
between, inner & outer portions of wall floted atop of 1/8" rubber
If this senerio is to thick what about the studs mounted sidways
to lessen space between inner and outer parts of the wall.
Thanks
Warren
