Page 1 of 1

back wall material

Posted: Tue Oct 28, 2003 7:40 am
by smog
Hi all,
I'm building an absorbent back wall and have thought about using the Guilford fr701. I'm wondering about muslin fabric. Has anyone used this before ? Is it worth looking into (cheaper). Thanks again.

Posted: Tue Oct 28, 2003 4:50 pm
by knightfly
I believe most, if not all, the Guilford stuff is fire rated. Muslin is too - it burns VERY well :( You might check with these guys for alternative treatments, I'm not sure if it's cost effectice or not, but I recommend NOT putting anything that's easily flammable in a tight room with possibly only one way out -

http://www.natfire.com/

Hope that helps... Steve