John Sayers' Recording Studio Design Forum Archive

this is a rough drawing of my proposed control room for my basement studio. the room dimensions are roughly 10w x 13l x 8h

[img]http://www.farewelltoarms-pr.com/croctober5.jpg[/img]

i have a few questions.

1. the walls in the front are at angles of 6 degrees, is this ok?

2. should i go hard or soft on the floor?

3. should i angle the back of the room or leave it straight?

4. in regards to the control room window, how important is having it on an angle? would i be ok with a straight window?

also any critique and/or potential problems with my layout, please let me know! thanks

for some reason it wont display the photo im not sure why, but the link is right there for anyone who needs to see it. im sorry for any trouble this may cause. thanks

take a look at the control I am finishing up. The size is real close to yours.

Bryan Giles.

I Have successfully fit over 6 people including myself in this room, with an equipment rack and 88 key controller.

http://www.johnlsayers.com/Studio/Pages/Giles.htm

The acoustics are GREAT!!!!