I have lots of questions, that will surely lead to only questions in return

-First, I am planning on building the control room and studio A first, then finish over a period of less than one year, as to remain oporational for the entire period of construction.
-Secondly, I need to know if my isolation techniques will be addiquit. I plan to have the walls of the individual rooms be 2"x4" studs on 16" centers. Then a layer of sheet rock, either a layer of MDF or thick insulation(which ever will do me better), with another layer of sheet rock on top. I plan to float the floors, but am not quite sure if I should use a strip of neoprene the lenght of the floorboards or just at specified points along the beams.
-Lastly, the goal for this studio is to be completely modular (simply meaning, if I were to move to Arizona and wanted to take my studio, I could encase each room in a thick case and load them all onto the back of a semi-truck and then place them back into another identical studio exo-skeleton).
Any suggestions, criticisms, or comments are always welcomed. As a last note, I did draft this in MS Paint, so it is not exactly to scale, but it is pretty close.