control room ceiling height

floatius · Post by **floatius** » Mon Sep 20, 2004 10:11 am

im planning on putting my control room in a 10 x 15 ft room. my problem is that the ceiling is 7.5ft high on half of the room and 6.5 ft on the other half because of a forced air duct. i cant move the duct. the duct would run perpendicular to the desk. positioned at the desk i would be facing the shorter wall. am i screwed? should i use bigger diffusers on the higher side and smaller ones on the lower side of the ceiling to even out the room. sorry about not having a picture, im having trouble with smart draw, please help , thanks

AVare · Post by **AVare** » Mon Sep 20, 2004 1:37 pm

With that ceiling height I would forget about diffusion and go mostly with absorption. With out a drawing, soffit the air ducts also.

Andre