DIY Friendly stretched fabric clips? (US)

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

BackEastDon
Posts: 40
Joined: Fri Feb 05, 2021 2:38 am
Location: Westminster MA USA
Contact:

DIY Friendly stretched fabric clips? (US)

Post by BackEastDon »

For the wall panels, I'm just going to staple the fabric but I also built a bass trap across the entire back knee wall just short enough to stretch Guilford of Maine fabric across the entire back width.

I've done high end commercial AV for a lot of years and have had to remove, install and adjust. I'm no pro at fabric walls but have at least dealt with them quite a bit. Any good suggestions for sourcing small quantity of easy to work with clips?
gullfo
Moderator
Posts: 5344
Joined: Wed Jul 13, 2005 3:55 am
Location: Panama City Beach, FL USA
Contact:

Re: DIY Friendly stretched fabric clips? (US)

Post by gullfo »

couple of products clients have used when they have a lot of fabric to mount:

https://www.fabritrak.com/
SnapLoc https://static1.squarespace.com/static/ ... etails.pdf
Glenn
Post Reply