Door Sweep?

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

houseofstone
Posts: 5
Joined: Sat Aug 06, 2016 11:23 am
Location: Calgary, AB, Canada
Contact:

Door Sweep?

Post by houseofstone »

Hey guys, I have a build going and the door and surround are all up to Rod's standards and utilizing the GM trunk rubber and multiple tears of overlapping rubber. Is there a good commercially available door sweep that you can recommend for the bottom of the door? Thanks, Christian
Soundman2020
Site Admin
Posts: 11938
Joined: Thu Aug 21, 2008 10:17 am
Location: Santiago, Chile
Contact:

Re: Door Sweep?

Post by Soundman2020 »

Please read the forum rules for posting (click here). You seem to be missing a couple of things! :)
Hey guys, I have a build going and the door and surround are all up to Rod's standards and utilizing the GM trunk rubber and multiple tears of overlapping rubber. Is there a good commercially available door sweep that you can recommend for the bottom of the door? Thanks, Christian
Zero International have some very good stuff. Take a look at their online catalog.


- Stuart -
houseofstone
Posts: 5
Joined: Sat Aug 06, 2016 11:23 am
Location: Calgary, AB, Canada
Contact:

Re: Door Sweep?

Post by houseofstone »

Thank-You Stuart! I've heard of them before. I will go look them up!!! Cheers
Post Reply