I,m getting my new near fields soon, and will be bilding a small project studio (only a control room) in the near future, but i have no specific room at present though.
but is it worth soffit mounting such small speakers? what about over heating I hear they get quite warm with the built in amps?
any pointers would be great.
kind regards
kieran
soffit mount dynaudio bm6a's and or genelec 1030's?
Moderator: Aaronw
-
bubblefish
- Posts: 15
- Joined: Tue Mar 30, 2004 2:25 pm
- Location: montreal quebec canada
-
giles117
- Senior Member
- Posts: 1476
- Joined: Sat Jun 21, 2003 2:42 am
- Location: Henderson County
- Contact:
Well once again i get to say it. 
I Soffitted my Mackie HR824's and have nothing but good success.
if heat is a concer, buy a couple of 120mm Computer fans to blow air past the amplifier and power them up with a radio shack 12vdc adapter
I Soffitted my Mackie HR824's and have nothing but good success.
if heat is a concer, buy a couple of 120mm Computer fans to blow air past the amplifier and power them up with a radio shack 12vdc adapter
Bryan Giles
FOH Live, Live Remote & Studio Engineer
Producer
Just living life and having fun with all this talent YHWH Elohim has given me.
FOH Live, Live Remote & Studio Engineer
Producer
Just living life and having fun with all this talent YHWH Elohim has given me.
-
bubblefish
- Posts: 15
- Joined: Tue Mar 30, 2004 2:25 pm
- Location: montreal quebec canada
-
MS-Scope
- Posts: 47
- Joined: Wed Jan 05, 2005 9:39 am
- Location: Germany
- Contact:
Soffit mount Dynaudio Bm6a?
Hello,
does it make any sense to soffit these speakers? They are rear ported bass reflex system or? I want to use these speakers in my new studio I´m building right now and need some advise. My room is 10.1 feet width and 12.5 feet in length. I use these plan for construction the walls and angles.
thx
ms-scope
does it make any sense to soffit these speakers? They are rear ported bass reflex system or? I want to use these speakers in my new studio I´m building right now and need some advise. My room is 10.1 feet width and 12.5 feet in length. I use these plan for construction the walls and angles.
thx
ms-scope
-
MS-Scope
- Posts: 47
- Joined: Wed Jan 05, 2005 9:39 am
- Location: Germany
- Contact:
I found this link about this topic but it only inludes information for passive hifi models: http://www.dynaudiousa.com/products/instal.htm
Maybe anyone here can help and has an info or a tip if Dynaudio Bm6a is soffit mountable? I have these speakers and love them. I´m building my studio right now and need to know if it is possible whith them. They are rear ported bass reflex system . I would hate to let them go cause I have worked whith them for quite a while and love their sound. It must be possible or? It would be really pissing me off if I have to change the speakers only of the soffit´s....
Michael
Maybe anyone here can help and has an info or a tip if Dynaudio Bm6a is soffit mountable? I have these speakers and love them. I´m building my studio right now and need to know if it is possible whith them. They are rear ported bass reflex system . I would hate to let them go cause I have worked whith them for quite a while and love their sound. It must be possible or? It would be really pissing me off if I have to change the speakers only of the soffit´s....
Michael