Overly dominant mids

Plans and things, layout, style, where do I put my near-fields etc.

Moderators: Aaronw, kendale, John Sayers

Stratcat
Posts: 24
Joined: Wed Apr 28, 2004 11:44 pm
Location: Edwardsville, IL
Contact:

Overly dominant mids

Post by Stratcat »

I am having mix problems and plan to do some of the acoustic treatment discuss here to my little studio room.

My monitors are Tannoy Reveal passives. They have always seemed to be very mid-heavy. I always assumed that was the nature of the Tannoys, but after reading here and thinking about it, I'll bet my room is doing something to over-emphasize the mids! My mixes sound good in the room and are very lacking in mids when played elsewhere. Duh...

If I understand correctly, building some hanging wall panels would probably help with this problem?

Would a simple wood framed panel made of fiberglass insulation covered with burlap help reduce this mid problem?

I am the same guy in the thread called "please help me fix my tiny studio"

http://www.johnlsayers.com/phpBB2/viewt ... e80030ddc6

You can see pictures there.


Thanks so much for helping!
dymaxian
Senior Member
Posts: 357
Joined: Tue Dec 02, 2003 7:21 am
Location: Madison, Wisconsin

Post by dymaxian »

It could be a lot of things. Do you have an EQ in the signal chain to the Tannoy's somewhere? If you can, get an out-board unit to put there. Monitor speakers almost always need a little EQ adjustment to get them comfortable in a room, no matter how good or bad the room is.

Since I know how challenging your room is, I'd recommend you wait until you get it treated before just buying gear, but that'd be my next step.

Kase
www.minemusic.net
Kase
www.minemusic.net

"to hell with the CD sales! Download the MP3s and come to the shows!"
Stratcat
Posts: 24
Joined: Wed Apr 28, 2004 11:44 pm
Location: Edwardsville, IL
Contact:

Post by Stratcat »

There is currently no EQ anywhere in the chain. Are you suggesting I put a graphic EQ in there and adjust it so that a commercial cd sounds "correct" to my ears?
dymaxian
Senior Member
Posts: 357
Joined: Tue Dec 02, 2003 7:21 am
Location: Madison, Wisconsin

Post by dymaxian »

Yup, that's pretty much it. You don't need to get a 31-band EQ or anything like that; just something that'll allow you to cut the mids down, and adjust the highs and lows to match your room. You'd have to do this with almost any monitor speakers, in almost any control room.

Look for a good-sounding EQ- go for higher quality over multiple bands. A 4-band with sweepable mids is plenty.

Kase
www.minemusic.net
Kase
www.minemusic.net

"to hell with the CD sales! Download the MP3s and come to the shows!"
Post Reply