the control room

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

terrible_buddhist
Posts: 116
Joined: Tue Oct 14, 2003 3:11 am
Location: Douglas, MA
Contact:

the control room

Post by terrible_buddhist »

Image

couple things...the window is actually going to be 4 foot, not 3.

there is going to be a window on the front, left hand side.

there is a door in the back of the room.

the ceiling is going to have a constant pitch, and I am going to try to get as close to 12 degrees as possible.

Can any one run the nodes on this and let me know what kind of traps I will need to do in here? Thanks!
terrible_buddhist
Posts: 116
Joined: Tue Oct 14, 2003 3:11 am
Location: Douglas, MA
Contact:

Post by terrible_buddhist »

actually...don't bother yet...the dimenstions need to change slightly.
Post Reply