Soffit mounting Dynaudio BM5a

Earshot · Post by **Earshot** » Mon Jul 28, 2008 12:09 pm

Hi there,

I am currently building a small studio (control room approx 3.5 by 4m) and am keen to soffit mount my monitors. My current monitors (JBL LSR25) are not suitable and will need upgrading. I am looking at either Mackie HR824 or Dynaudio BM5a ´s. I have read a bit about the Mackies and their suitability for soffit mounting but am interested to know if the Dynaudio´s are suitable? If not can anyone reccommend some monitors in this price range? I mainly mix rock/pop and do not want to run a sub.

Cheers,

Matt

Lou · Post by **Lou** » Tue Jul 29, 2008 4:25 pm

Hi Matt - Not sure how much help I can be but this is a shot of my control room with my Air 15's soffit mounted.

I can tell you that all the 'Air' range are designed to be soffit mounted.

I think your best bet would be to contact T.C. Electronics (distributors for Dyn-Audio) and ask them.

For my two cents, in any event, the BM's will out-class the Mackie's all day long!

Just an opinion dude.

Regards,

Lou.

Earshot · Post by **Earshot** » Tue Jul 29, 2008 8:29 pm

Hi Lou,

Thanks heaps for that, nice room too! I am leaning towards the Dynaudios, however I couldn't find any info specifically relating to soffit mounting that model, might try contact dist. as you said,

Cheers,

Matt

Earshot · Post by **Earshot** » Tue Aug 05, 2008 10:10 am

Just incase anyone is interested, I contacted TC Electronics and they said they did NOT reccommend soffit mounting of the BM5´s due to the rear port. Am looking into some Adam A7´s which I hope will be a better option, be stoked to hear from anyone who uses a set of these?