Roxul Drainboard instead of 703 ??

How to use REW, What is a Bass Trap, a diffuser, the speed of sound, etc.

Moderators: Aaronw, sharward

Harper
Posts: 31
Joined: Wed Oct 15, 2003 12:25 am
Location: Ontario, Canada

Roxul Drainboard instead of 703 ??

Post by Harper »

Hey Everyone

I'm having a hard time finding 703 here in my hometown.
But I found something made by Roxul called 'DrainBoard'
it's only $7 a sheet.

Do you think that would work as a replacement for 703 ?
The density of the Drainboard is 8 pounds per cubic Foot, which is more than the 703.

Check it out here http://www.roxul.com/sw17020.asp

Let me know what you think.
Harper
Posts: 31
Joined: Wed Oct 15, 2003 12:25 am
Location: Ontario, Canada

Post by Harper »

Anybody??
Harper
Posts: 31
Joined: Wed Oct 15, 2003 12:25 am
Location: Ontario, Canada

Post by Harper »

Anybody??
knightfly
Senior Member
Posts: 6976
Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA

Post by knightfly »

Hey Harper - sorry no responses yet - I just saw this, and downloaded the incredibly large ??!? pdf - then dnl the other two, and found nothing in any of them about acoustic performance.

From their description, it sounds like the stuff is just heavy mineral wool - till you get to the statement and pic about "waterproof" - from that, I would hazard a guess that they run the stuff through a bath that coats the fibers with a sealant of some kind. That would change the acoustic response, but with zero data I wouldn't care to guess HOW it changes.

The stuff requires a water barrier behind it, and is apparently intended to give a porous layer next to concrete to promote drainage away from the concrete.

All in all, it seems like a gamble to me - with no specs on acoustics, the waterproofing treatment, and the extra heavy weight, I wouldn't take the chance anywhere that's going to get covered up.

For an experiment, however, a gobo or two (or a piece just thrown up in the corners of a room) might prove interesting. At that price, as long as you don't build it into your structure without knowing what it can do, it wouldn't cost much to "play with"... Steve
Harper
Posts: 31
Joined: Wed Oct 15, 2003 12:25 am
Location: Ontario, Canada

Post by Harper »

Thanks Steve
FrankW
Posts: 2
Joined: Sun Feb 08, 2004 4:38 am
Location: BC

Post by FrankW »

Their Rxl-board 40, 60, 80 products are the equivalent of fiberglass board.
4, 6, and 8 lbs/cu foot.

http://www.roxul.com/sw34934.asp?langtype=commercial

Frank
AVare
Confused, but not senile yet
Posts: 2336
Joined: Thu Feb 05, 2004 1:56 pm
Location: Hanilton, Ontario, Canada

Post by AVare »

I am echoing what FrankW wrote.

Look at Roxul's commercial line of prodicts, particularly their 4 lb/cf stuff. Better thn 703. I almost feel like a heretic writing that, but look at eh acoustic specs compared to 703.

Good luck!
Post Reply