.
I have been searching for a supplier of the composite material PKB-2 that I am interested in buying,
however, its a hard product to source.
I have written an email to the manufacturer, however, they are slow in replying.
http://www.acusticaintegral.com/ais_pkb2_en.htm
.
I am not really sure how much it costs, and not completely sure what dimensions it comes in.
On their site is labeled 5.000 x 1.000 mm, which I think means 500 cm x 100 cm?
.
I am considering to use this to line the inside of my absorbent isolation booth (over the layers of absorption). I figure that a layer of this will also give a fairly good surface that can then be covered with acoustic fabric or acoustic foam.
.
I have purposely not chosen to line the inside of the booth with several layers of plasterboard / dry lining, as the isolation booth is small in nature so I want the least amount of reflections and max amount of absorption possible.
.
Anyway, if anyone has any info I would be really thankful.
I would also be happy to hear any good advise to alternatives.
Thanks again to all who have all ready have helped me so far.
You have all been star's in your generosity!
Tootle pip...
