Control Room Layout

Scott1123 · Post by **Scott1123** » Thu Oct 23, 2003 1:09 am

Hey, long time reader, first time poster.
I'm about to start construction/demolition. If I could
get some opinions on the general shape of my CR, that would
be great.

Thanks so much

knightfly · Post by **knightfly** » Thu Oct 23, 2003 1:44 am

Scott, you need to reverse the side angles - the plan is to have early reflections from walls be re-directed behind you, where they can be absorbed. Check a few of the other drawings here, you'll see what I mean - just think like a pool player - you're shooting from the speaker location, and no matter where you hit the cushion (wall) you DON'T want to hit the guy in the chair (except for a straight shot)

Hope that helped... Steve