I don´t know exactly what to do with my conections. I want something clean no mic or instrument cables over the carpet. If so I need to go from A to B (in the picture) and from C to B using multipair cable. Then I have to go from B to the mixer XLR or plug connections. I use a delta 1010lt, so I have only 8 channels. How can I distribute my connections???. How many plugs and XLR´s??.
Can I have a wall plate connector in one point and a XLR m/f on the other??. That way I can go directly to the mixer without using a wallplate on B. Hope you can give me some guidelines about how to do it.
Thanks in advance
Alfonso
XLR & plug connections
Moderator: Aaronw
-
TamaSabian
- Posts: 33
- Joined: Sat Aug 23, 2003 4:16 am
- Location: Lima, Peru
-
gullfo
- Moderator
- Posts: 5344
- Joined: Wed Jul 13, 2005 3:55 am
- Location: Panama City Beach, FL USA
- Contact:
maybe a couple of audio snakes with floor boxes? you could put in a set of clips overhead to hang the wire on, or on the C side, along the edge of the floor. then it would be easy enough to move the floor box closest to where ever you need mics and keep the mic cables to 8-12 feet.
normal snake (example only)
http://www.pulsartech.net/product/P1650-XXS_F9
digital at the source?
http://www.procomomentum.com/?page=system
as far as connecting - you could have XLR patch panels sitting in your console desk or attached to the wall. or prewired to your mixer(s).
normal snake (example only)
http://www.pulsartech.net/product/P1650-XXS_F9
digital at the source?
http://www.procomomentum.com/?page=system
as far as connecting - you could have XLR patch panels sitting in your console desk or attached to the wall. or prewired to your mixer(s).
Glenn
-
TamaSabian
- Posts: 33
- Joined: Sat Aug 23, 2003 4:16 am
- Location: Lima, Peru
Thanks man!
Here in my country those audio snakes are very expensive. That´s why I like the multipair cable alternative. Points A,B and C are ready in my one room studio I have to detach the plates that are covering the holes and then install the connectors. There´s a place here where you can find all kind of audio gear not too many brands but I think I can do and A/B between audio snakes with floor boxes and multipair cable with wallplate connectors. Lower price will decide.
Alfonso
Here in my country those audio snakes are very expensive. That´s why I like the multipair cable alternative. Points A,B and C are ready in my one room studio I have to detach the plates that are covering the holes and then install the connectors. There´s a place here where you can find all kind of audio gear not too many brands but I think I can do and A/B between audio snakes with floor boxes and multipair cable with wallplate connectors. Lower price will decide.
Alfonso