adding a sub

[joey]

hi i have a pair of yamaha ns10m monitors and a alesis ra500 amp. i wanted to add a genelec 7070a sub to the system. would i just use a seperate output from my digidesign 192io (i have 8 balanced outputs and 1 and 2 currently are going to the amp. so if i ran 3 to the genelec 7070a would this work.) many thanks. joey

[kevin kitchel]

The amplifier unit integrated into the cabinet contains active crossover filters.

You would go into the sub, then out into your amp.

[joey]

thanks for your reply that help alot