Please Help - Hole at 105 Hz

[liax1975]

Hello and thanks to all the feedback.

First thing, the Subwoofer:

It is right that there was a Subwoofer (Adam Sub 12) in the corner, but it is damaged and at this moment hopefully at Adam U.S. for repair!

So I measured without the Sub.

I already moved the mixing position and it´s a bit better now .. I think I will leave it in this position and go on to make music


Thanks again, it´s a very helpfull and of course one of the best Forums here I´ve ever been ....

John .. Thanks also to you for this great thing .. If everything is bad with the studio I built I would be glad to here .. May that I could improve anything from which I at the moment not know that it is bad

Donation will follow the next days ... Keep on rockin`..

[knightfly]

First, I agree with John that your response isn't all that bad; second, it is DEFINITELY possible for a cabinet that resonates to cause a DIP in that frequency; this is one of the main ways a panel trap works - it takes ENERGY to cause it to vibrate, and that is part of what turns the audio energy into heat energy.

I'd try stuffing a LOT of pillows, etc, into those cabinets and see if the dip goes away... Steve

[kendale]

Aloha,

Thank you for pointing that out Steve. Welcome back, we've missed you.

Aloha

[knightfly]

Thanks, me too; but I doubt I'll be here much just yet, still doing the corp. vid thing while attempting to climb the (vertical)learning curve of Vegas 7, keep things together at home, work 12's, etc... Steve

[liax1975]

Hi Knightfly,

thanks, so it was right what I suggested.

Those tabllestands are good to put all the cables inside, so before filling them with pillows I need to put these cablesalad out .. But I have two weeks off work from tomorrow on, enough time I hope

To all of you a merry Christmas !!!!!

the 105"db"-dip-liax

(Yes, it should be Hz )