SKP files ready to use

judah · Post by **judah** » Thu Jun 01, 2006 11:16 pm

Hi all,
while learning how to use Sketchup, I designed Sayer's units and here are the files. You can use this to do a check and see how many units you can fit in your room. Unfortunately the corner traps are 90° corners so if you have splayed wall you'll have to work it out by yourself.
To John, if there is any problem with this post please delete it. I saw some users in the past asking for ready made SKP file of this units so I thought it would have been a good idea to provide'em.

J.

judah · Post by **judah** » Tue Jun 06, 2006 1:45 am

Hey fellows!
I see you downloaded the file quite a bit!
Did them worked out for you? Any problems?
Let me know....

Cheers.

J.

Ro · Post by Ro » Thu Dec 14, 2006 8:32 pm

Hai, just found this thread.
Very nice, thanx you.

now, here's a paneltrap/resonator (presure trap) 2'x4'x4" 9mm plywood

guavatone · Post by **guavatone** » Sun Dec 17, 2006 12:31 pm

some 4x2' panels and a mongo 8'x3' one

kevin kitchel · Post by **kevin kitchel** » Fri Jan 05, 2007 6:23 am

Thank you for the work guys!