ASC StudioTraps

How to use REW, What is a Bass Trap, a diffuser, the speed of sound, etc.

Moderators: Aaronw, sharward

rich
Posts: 16
Joined: Fri Feb 03, 2006 7:07 am
Location: Nashville

ASC StudioTraps

Post by rich »

Hey everybody.

I've just spent some time at the ASC website, and those StudioTraps and Quick Sound Field look really interesting.

http://www.asc-studio-acoustics.com/rs-products.htm

So, what are the odds that I could somewhat duplicate these by rolling up some 4" mineral wool like a jelly roll, lining one side of it with half-mil plastic, and wrapping it with fabric?

Are the odds about the same as winning the lottery, which would enable me to just buy the product outright?

Thanks.

rich
knightfly
Senior Member
Posts: 6976
Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA

Post by knightfly »

Seen this?

http://www.geocities.com/jonrisch/basstrap.htm

Maybe not quite as elegant, but same acoustic result. Be prepared to build several for the effect to be noticeable... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
rich
Posts: 16
Joined: Fri Feb 03, 2006 7:07 am
Location: Nashville

Post by rich »

Seen this?
I have NOW. Steve, you never cease to amaze me. Thanks again.

Jon takes 6.5" fiberglass and compresses it to make it the proper density. But I already have the proper density SAFB mineral wool, so I wouldn't have to compress it.

Wouldn't it be good to just fill the entire cylinder with the SAFB? After all, Superchunks are solid. Or is the secret in the air inside?

And lastly, after reading so many posts here for so many months, how come I've never seen this mentioned before? Is it just not very effective? Is it inferior to the superchunks?

Does anyone have first-hand experience with these?
rich
Posts: 16
Joined: Fri Feb 03, 2006 7:07 am
Location: Nashville

Post by rich »

Anybody?
Wouldn't it be good to just fill the entire cylinder with the SAFB? After all, Superchunks are solid. Or is the secret in the air inside?
Post Reply