How to use REW, What is a Bass Trap, a diffuser, the speed of sound, etc.
Moderators: Aaronw , sharward
Jujuman
Posts: 16 Joined: Tue Apr 18, 2006 5:22 pm
Location: NYC USA
Post
by Jujuman » Tue Apr 25, 2006 12:24 pm
Hello John;
What are your thoughts on honeycomb resonators and there effiency diff vs. slat resonators. Is the diff just visual and construction?
Thanks
Jujuman
knightfly
Senior Member
Posts: 6976 Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA
Post
by knightfly » Tue Apr 25, 2006 9:51 pm
What are you calling a "honeycomb" resonator - can you either describe, link, or sketch one? Thanks... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
Jujuman
Posts: 16 Joined: Tue Apr 18, 2006 5:22 pm
Location: NYC USA
Post
by Jujuman » Wed Apr 26, 2006 7:28 am
Hello Knightfly;
The ones with the holes on the front and pipes behind plywood with 703 or similar behind that.
Thanks
Jujuman
knightfly
Senior Member
Posts: 6976 Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA
Post
by knightfly » Mon May 01, 2006 5:17 am
Sounds like a perforated panel Helmholtz - slightly different calculations, but for same overall dimensions you should get very close to same results. Mainly different construction techniques and visual appearance... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
Jujuman
Posts: 16 Joined: Tue Apr 18, 2006 5:22 pm
Location: NYC USA
Post
by Jujuman » Mon May 01, 2006 2:01 pm
Thanks Knightfly;
That is what I thought as well. I just wanted to make sure I undrestand the concepts.
Jujuman