Diffusion???

[Bryan]

Hi, ok first id like to thank everyone for their help so far all i have left is to lay my floor, make a rack/tabel and a few small bits.

ok 3/4 way down my room which is 12' x 21' is a sliding door pvc.
oppisite this is a bare plastered wall,
would it be a good idea to treat this wall with a large diffuser as in
a sheet of 8x4 curved or loads of skyline diffusers?

if not what, if any treatment would be reccomended?

thanks again.

bryan.

[John Sayers]

I'd put 703 opposite your door Bryan. Don't you have wall units going down your long side walls as per your plan??

cheers
john

[Bryan]

actually this is how it worked out ive photos of most of it ill send them to u soon if you want?

any way this is it.
the X is where im concerned about

[John Sayers]

yeah - I know where you mean, and I'm suggesting you put insulation opposite the door.

cheers
john

[Bryan]

Thanks john, will do, i have some 2" acoustic tiles from www.studiospares.co.uk left over so ill use them,

will i cover the exact same space as the door or would the whole area be better?

or even would a diagonal version be any good, ie like a tile then a hard surface etc....

thanks very much for your help.

bryan

[Bryan]

ps heres a direct link to those tiles

http://www.studiospares.com/productdeta ... &p=1&gid=6

also heres some ceeling tiles i have a good few of them but i dont
think there any good what do you make of them?

http://www.studiospares.com/viewproduct ... &p=1&gid=6

suppose i could use them in my vocal booth

[John Sayers]

Bryan - I'd stick with the 703 or rockwool - I'm sure it's cheaper. Just make another wall unit but with insulation instead of slats.

those ceiling tiles you have I'd stick to the wall in between your wall panels that you have running down your long walls.

cheers
john