My contractor got a quote on 80 hooks and associated hardware, to suspend a 25x28 ceiling. The materials alone came to $5400, which is more than I want to pay.
Are there cheaper sources for these? If not, I'll probably come begging for advice on other ways to put up a "soundproof" ceiling in new construction. The studs for the walls are up, and I'm using double wall, staggered studs and several layers of wallboard; the ceiling and HVAC vents are the last puzzle. Thanks for any pointers.
Spring-loaded ceiling hangers, Boston?
Moderators: Aaronw, John Sayers
-
- Posts: 3
- Joined: Sat Mar 12, 2005 12:00 am
Cheap Hangers
Mason Industries has a simple but effective design. The WHR sereies [different loads] cost me about $4.00 each.
Contact them to find a distributor in Boston. I was able to get them here in St Louis through an A/C supplier.
http://www.mason-ind.com/neoprene_sound_isol_system.htm
Contact them to find a distributor in Boston. I was able to get them here in St Louis through an A/C supplier.
http://www.mason-ind.com/neoprene_sound_isol_system.htm
-
- Posts: 219
- Joined: Mon Aug 30, 2004 11:46 am
- Location: Nashville, TN
I don't know the cost of these things at all, so I don't know if your $5400 is good or bad. However, if I'm hanging a ceiling above my head, i'm certainly not going to go cheap on the hangers. I'm not real fond of a few thousand pounds of construction moving towards my head at a rapid rate.
Make sure you get the right stuff, and consider Steve's triangle of good, fast, and cheap before you balk at something because of cost.
Make sure you get the right stuff, and consider Steve's triangle of good, fast, and cheap before you balk at something because of cost.
SaM Harrison
Location Engineers
Nashville, TN
Location Engineers
Nashville, TN
-
- Posts: 85
- Joined: Mon Mar 14, 2005 12:09 am
- Location: St. Louis, MO
- Contact:
-
- Posts: 3
- Joined: Sat Mar 12, 2005 12:00 am
Sword9 wrote:I don't know the cost of these things at all, so I don't know if your $5400 is good or bad. However, if I'm hanging a ceiling above my head, i'm certainly not going to go cheap on the hangers. I'm not real fond of a few thousand pounds of construction moving towards my head at a rapid rate.
Make sure you get the right stuff, and consider Steve's triangle of good, fast, and cheap before you balk at something because of cost.
The manufacturer has clear requirements for installation and loads. I don't think they would risk liability to their company by offering inaccurrate information. I think your response could be considered an uneducated one.
-
- Posts: 219
- Joined: Mon Aug 30, 2004 11:46 am
- Location: Nashville, TN
My reply was not manufacturer specific, I was simply reminding the Guest that he/she needed to really make sure that whatever method they chose, that it was safe, reliable, and properly planned. And also that sometimes safe is expensive when it comes to things that hang.
I do believe also that my first sentence states my uneducated nature about the cost of ceiling hangers.
I do believe also that my first sentence states my uneducated nature about the cost of ceiling hangers.
SaM Harrison
Location Engineers
Nashville, TN
Location Engineers
Nashville, TN