I'm not certain if this is in the PAC site or not, but I thought it was pretty nifty, to use a technical term. It is from this thread[url=http://www.avsforum.com/avs-vb/showthre ... did=473081[/url]
The drawing was posted in BMP so I converted it to JPG, hence the posting of what is in the linked thread.
The idea could be applied to RC etc. also.
Discretely well hung;
Andre
Low celing RSICs
-
AVare
- Confused, but not senile yet
- Posts: 2336
- Joined: Thu Feb 05, 2004 1:56 pm
- Location: Hanilton, Ontario, Canada
-
z60611
- Posts: 251
- Joined: Fri Jun 18, 2004 9:08 am
- Location: Ontario, Canada
I've been planning to do the same sort of thing for a while.
In my case I'm thinking of using the Kinetics ICW springs, which require double perpendicular grid of hat channel. So the first layer of channel will be between the joists (1/4" below), and the second layer of channel will be lower than the joists.
In my case I'm thinking of using the Kinetics ICW springs, which require double perpendicular grid of hat channel. So the first layer of channel will be between the joists (1/4" below), and the second layer of channel will be lower than the joists.