What about this one

rsb · Post by **rsb** » Thu Jun 05, 2003 9:08 am

I now have a pile of lumber and a pile of 703 in my garage

I have attached what I will be building. What do you think of the angle on the soffits?

Overall comments also apprciated.

Thanks
Ryan

Post by **John Sayers** » Thu Jun 05, 2003 10:13 am

That's the correct angle Ryan - perhaps place an absorber between them??

cheers
john

rsb · Post by **rsb** » Fri Jun 06, 2003 5:57 am

I have been reading different posts out there and have wondered if I should not just put Hangers along that back wall behind the false wall.

What do you think?

Thanks
Ryan

Post by **John Sayers** » Fri Jun 06, 2003 3:51 pm

It's really up to you Ryan - both hangers and panel absorbers will absorb the low end which is what you are after. Perhaps maybe the hangers will take out more of the low - upper mids than the panel absorbers but it's touch and go either way.

cheers
John

rsb · Post by **rsb** » Sat Jun 07, 2003 1:52 am

Thanks to you John

John Sayers' Recording Studio Design Forum Archive

What about this one

What about this one

Another thought

Many many