Trying to do it right this time..

[AVare]

Those photos show a very 'Pro' look.

+1

Andre

[JasonFoi]

Just about done, measurements coming soon. Wish me luck!

[Soundman2020]

Wow! V-E-R-Y cool!

Love the "ultraviolet" look.


- Stuart -

[JasonFoi]

Thanks Stuart! I'm really happy with the asthetics. Now lets just hope i can tune her to sound as good as she looks. So far i'm about +/-8db except for a 20db cancellation at +/-700hz. Only ringig i have is around 20-35hz. Im pretty optimistic about the minidsp having a positive efdect. I'll play around with sub placement a bit and tgen post a before dirac mdat.

[JasonFoi]

ok, here's about the best I can do with positioning the subs. It looks pretty good to me but I'd like to hear what you think. Do you think this is a good enough starting point to start using my minidsp with dirac, or are there any big red flags I need to address first? The big dip I had at +\-700hz was from that tiny little flat part where the computer keyboard/mouse go. I put an angled piece of wood over it for the test. I'll make a new top that looks nice to be permanent.

The attached *.mdat is all speakers together. 2x Eve audio SC208 and 2x KRK10S
There is a -6db low shelf on the mains for baffle step compensation
No other crossovers have been set other than the ones on the subs themselves