DIY Sliding Glass Door Help

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

nmk85roll
Posts: 31
Joined: Sat Oct 18, 2014 12:40 am
Location: Chicago, IL

DIY Sliding Glass Door Help

Post by nmk85roll »

Hey guys, hoping someone can help me here. I've been doing a lot of research here on double sliding doors that John uses a lot in his design. The thread I found from a while back apparently had a list of things to look for when buying stock sliding doors. However, I"m thinking maybe that the thread got archived and the image is no longer available.

http://www.johnlsayers.com/phpBB2/viewt ... iding+door

Anyone know what the "suggest requirements" were or know where this image was referenced from?

Appreciate the help!
Soundman2020
Site Admin
Posts: 11938
Joined: Thu Aug 21, 2008 10:17 am
Location: Santiago, Chile
Contact:

Re: DIY Sliding Glass Door Help

Post by Soundman2020 »

However, I"m thinking maybe that the thread got archived and the image is no longer available.
Thanks for bringing that to my attention! That's a very old thread, and it used the old system for inserting images. I fixed it now, updating to the newer method. IF you see other threads lie that, please let me know. I can't always fix them, but sometimes I can. You got lucky here! Let me know if it is working OK now for you.

- Stuart -
nmk85roll
Posts: 31
Joined: Sat Oct 18, 2014 12:40 am
Location: Chicago, IL

Re: DIY Sliding Glass Door Help

Post by nmk85roll »

Thanks Stuart! Worked like a charm!
Post Reply