I posted this in speaking of speakers forumhttp://www.johnlsayers.com/phpBB2/viewt ... 12&t=16933, but I think it belongs here too.
I finally have something to put in those big holes.
Best's Studio
-
Eric Best
- Senior Member
- Posts: 311
- Joined: Fri Feb 14, 2003 1:51 am
- Location: Lansing, MI USA
- Contact:
Re: Best's Studio
"It don't get no better than this"
-
Eric Best
- Senior Member
- Posts: 311
- Joined: Fri Feb 14, 2003 1:51 am
- Location: Lansing, MI USA
- Contact:
Re: Best's Studio
At Stuart's suggestion, I am continuing the build thread on my speaker build thread. If you wish to follow here is the link. http://www.johnlsayers.com/phpBB2/viewt ... 15#p141911.
This link should take you to the start of the speaker build. If you want a little more of the speaker build theory you can go to the beginning of the thread.
This link should take you to the start of the speaker build. If you want a little more of the speaker build theory you can go to the beginning of the thread.
"It don't get no better than this"
-
Eric Best
- Senior Member
- Posts: 311
- Joined: Fri Feb 14, 2003 1:51 am
- Location: Lansing, MI USA
- Contact:
Re: Best's Studio
I posted this in my speaker building thread, but I am also posting it here. The finished (?) control room.
"It don't get no better than this"