Video explaining digital audio

Get your "what mic?" frustration or "have you heard" out here. The language could get real okka in here mate.

Moderators: Aaronw, kendale, John Sayers

JCBigler
Posts: 110
Joined: Wed Jun 30, 2004 8:30 am
Location: Chouteau, OK, USA

Video explaining digital audio

Post by JCBigler »

While not directly related to studio design and construction, I think most of us are working with digital audio at this point...

Here is a video that some folks on another pro audio forum posted explaining digital audio. It's about 22 minutes long, but very well done and very informative.

http://www.xiph.org/video/vid2.shtml
Soundman2020
Site Admin
Posts: 11938
Joined: Thu Aug 21, 2008 10:17 am
Location: Santiago, Chile
Contact:

Re: Video explaining digital audio

Post by Soundman2020 »

After watching this again, many months later, I decide that it really needs to be a "sticky", as it is just so good, and dispels so many myths about digital signals, as well as D/A and A/D conversion, bit depth, sampling rate, dithering, and a bunch of other stuff.

For anyone who hasn't seen it yet, I highly recommend that you watch it. 23 minutes very well invested!

Thanks very much, J.C.!


- Stuart -
JeromeAck
Posts: 3
Joined: Fri Oct 16, 2015 1:31 pm
Contact:

Re: Video explaining digital audio

Post by JeromeAck »

Very impressive! Great Work. Thank you!
arctur11
Posts: 1
Joined: Wed May 22, 2019 8:13 pm

Re: Video explaining digital audio

Post by arctur11 »

Thanks, I'll check it out.
I still try to learn a lot in terms of DAWs, but I don't really know a thing about bit rate parameters etc.
Post Reply