Suppliers in NYC area?

linus · Post by **linus** » Sun Apr 11, 2004 8:17 am

Hello;

I am building an iso booth in my studio space. I need suppliers for RC-1, Neoprene, Roxul or 703, and construction materials (drywall/lumber) in general and would appreciate any help with suppliers in the NYC area.

Thanks
Brian

Brian J. Bauhs
brianjbauhs@yahoo.com

Guest · Post by **Guest** » Wed May 05, 2004 12:38 am

Brian -

Don't know if you;ve already found suppliers, but if not:

For neoprene, try Canal Rubber - it's on Canal a block or two west of Broadway.

For 703, J&S Supply in Long Island City - don't remember the address, but it's right by the Greenpoint Ave. bridge from Brooklyn. I've been getting 1" unfaced 703 from them for .34/sq. ft.

For other general construction materials, I've been mostly using Kamco - they are a big supplier with several locations. They'd be a good bet for RC, Thermafiber, and any standard stuff like sheetrock, framing materials, etc.

Riad · Post by **Riad** » Wed May 05, 2004 4:22 am

Try here for the Roxul AFB and RHL 40/60/80
http://www.johnlsayers.com/phpBB2/viewtopic.php?t=1186

linus · Post by **linus** » Wed Jun 16, 2004 12:46 pm

J&S in Long Island City turned into the perfect supplier for OC 703. Funny guys, really helpful, low prices.

Canal street rubber was a great source for neoprene as well.

Thanks for the help.

cfuehrer · Post by **cfuehrer** » Wed Jun 16, 2004 9:04 pm

I used a souce neoprene I found on here http://www.fbw-cincy.com

I got 60 durometer 1/2" thick neoprene custom cut to Size: 1/2" thk x 2" x 36" long $ 3.93 each strip. From there I cut the strips myself into 2"x2" pucks. Contact info is:

Bev Phillips
bevp@fbw-cincy.com
F.B. Wright Co.
p 513-874-9100 800-582-0011
f 513-874-0235 800-874-0247