Blue Bear Sound is up

DDev · Post by **DDev** » Tue Mar 04, 2003 3:20 pm

Hmmm........Might be a bit on the expensive side, but you could stitch braided shield together and give it a good solid earth ground. It would have a shimmering effect.

Post by **John Sayers** » Tue Mar 04, 2003 9:14 pm

after wiring the studio out he'll probably have enough braid strands in the carpet to do just that

cheers
john

Post by **John Sayers** » Mon Mar 10, 2003 3:53 pm

Bruce's second update is up

http://johnlsayers.com/Studio/index.htm

cheers
John

Blue Bear Sound · Post by **Blue Bear Sound** » Mon Mar 10, 2003 10:47 pm

Thanks John.......!

BTW... I noticed the pics aren't the same resolution as what I sent you (they're much more fuzzy) The size of the pics on your site are larger, yet the resolution is lower?!?!

Do you need me to send you files in a different format? (I believe I sent you 50% compressed JPG...)

Post by **John Sayers** » Tue Mar 11, 2003 6:33 am

I didn't resize them at all - but I did lighten some of the shots as they appeared too dark and you couldn't see the detail.
I'll post the originals if you like.

cheers
John

Blue Bear Sound · Post by **Blue Bear Sound** » Wed Mar 12, 2003 4:44 am

No big whoop! Just curious.... no need to change 'em!

I'll make sure the next batch is bright enough!

Post by **John Sayers** » Wed Mar 19, 2003 4:48 pm

Bruce's update 3 is now up

http://johnlsayers.com/Studio/index.htm

cheers
john

LDQ · Post by **LDQ** » Wed Apr 23, 2003 7:26 am

Hi Bruce,

Can you tell me for what reason you didn't make the soffit wall... reflective...I can see you placed wood above and below the speaker hole but not on the side. Instead you putted some rockwool...unless you are planing on covering it later???

Let me know...I am in the process of building mine for my studio.

Regards,

luis.

Post by **John Sayers** » Fri Apr 25, 2003 2:50 pm

Bruce's 4th update is up

http://johnlsayers.com/Studio/index.htm

cheers
John

Guest · Post by **Guest** » Sat Apr 26, 2003 1:26 am

Hey Luis,

The soffit wall is now reflective -- 5/8" wood on the entire front fascia and up the sides to the cream-colored area...

Pics are coming as soon as the builder is done with the finishing!

Bruce

LDQ wrote:Hi Bruce,

Can you tell me for what reason you didn't make the soffit wall... reflective...I can see you placed wood above and below the speaker hole but not on the side. Instead you putted some rockwool...unless you are planing on covering it later???

Let me know...I am in the process of building mine for my studio.

Regards,

luis.

Post by **John Sayers** » Thu May 01, 2003 10:42 am

Bruce's 5th update is up

http://johnlsayers.com/Studio/index.htm

cheers
John

Blue Bear Sound · Post by **Blue Bear Sound** » Sun May 04, 2003 9:58 pm

And now a 6th update with better pics!

http://www.johnlsayers.com/Studio/Pages/Bluebear6.htm

(thanks again, John!)

Post by **John Sayers** » Wed Jun 04, 2003 12:09 pm

Bruce has posted some new updated pics with all the gear in

http://johnlsayers.com/Studio/index.htm

I'd post this at HR as well but I can't get onto the damn site!!!

cheers
john

Michael Jones · Post by **Michael Jones** » Wed Jun 04, 2003 2:05 pm

DAY-UMM!
That looks SOOO nice!!

Blue Bear Sound · Post by **Blue Bear Sound** » Wed Jun 04, 2003 10:53 pm

Thanks Michael....

I had some prospective clients by last night to have a tour... they had just come from one of my competitors (whose place I had only seen in photos).

They were blown away - saying my competitor's place couldn't hold a candle to it. It's bigger, more comfortable, and has a much better vibe! (Their words!)

That's encouraging -- nice to know how my place compares to my competitor's from a client perspective!

John Sayers' Recording Studio Design Forum Archive

Blue Bear Sound is up

Question on your soffit construction....

Update 4

Re: Question on your soffit construction....

Update 5