back to the drawing message board

terrible_buddhist · Post by **terrible_buddhist** » Wed Apr 28, 2004 2:00 am

here is my shell of a control room...the outer framing has been done, so this is my inner dimensions. I can't figure out how to get a good angle on the speakers, as well as the splayed walls, which I imagine will need to be slat absorbers.

sincerly...lost

VSpaceBoy · Post by **VSpaceBoy** » Wed Apr 28, 2004 6:50 am

IMO the last design I saw of yours was the best use of space. If your having trouble making your angles for the monitors work with that window just consider closing up some of window. Only leave say 36" instead of 48". That would get you closer.
Other than the design you had before I wouldn't be able to recommend anything better

Ron

Post by **John Sayers** » Wed Apr 28, 2004 9:02 am

mate - aren't we going around in circles here - I've already drawn it for you -

here it is again

cheers
john

terrible_buddhist · Post by **terrible_buddhist** » Wed Apr 28, 2004 11:08 am

yes, but when I went to the 4 foot window, everything got messed up and my angles were all screwed up

Also, the dimensions I gave you was for the room with no framing (floor only), these new dimensions are the inside diameter of the room. Further screwing things up is the second window into the vocal booth.

also, the front window will be flush as this is a free standing room

Really sorry about the confusion. Any help getting me straightened out would be greatly appreciated and help me get a good nights sleep

Post by **John Sayers** » Thu Apr 29, 2004 9:02 am

Here it is scaled to the new dimensions.

cheers
john

terrible_buddhist · Post by **terrible_buddhist** » Sat May 01, 2004 12:12 am

John, I can't thank you enough for this.