Hello all.
I have a substantial quantity of OC-703 in 4" thickness. Unusual board size:
All are 48" long, but vary slightly in width from 37"-39". These were miscuts from a manufacturer that uses custom-sized boards. Any boards that are not exactly the right width can't be run on their equipment. After a few pallets worth are collected over time, they sell them off.
You can trim all to 36" x 48", or I like to cut them in half for 2' boards.
Please let me know if interested.
FS: 4" OC-703 in Cleveland, OH
Moderators: Aaronw, John Sayers
-
Tubamark
- Posts: 5
- Joined: Tue Jan 18, 2011 6:33 am
- Location: Cleveland, Ohio, USA
-
Young Shoota
- Posts: 30
- Joined: Mon Nov 15, 2010 4:15 pm
- Location: Cleveland, Ohio
Re: FS: 4" OC-703 in Cleveland, OH
do you still have the 4" 703?
-
Tubamark
- Posts: 5
- Joined: Tue Jan 18, 2011 6:33 am
- Location: Cleveland, Ohio, USA
Re: FS: 4" OC-703 in Cleveland, OH
Yes. PM sent.Young Shoota wrote:do you still have the 4" 703?
-
videochump
- Posts: 1
- Joined: Wed May 25, 2011 2:05 am
Re: FS: 4" OC-703 in Cleveland, OH
Hey,
I happen to be in cleveland area and could schedule pick up if you have some of that stuff left over. If not would be interested in knowing a good place to acquire locally at an excellent price. I don't care if it is cut or broken or otherwise mishapen.
Andy
I happen to be in cleveland area and could schedule pick up if you have some of that stuff left over. If not would be interested in knowing a good place to acquire locally at an excellent price. I don't care if it is cut or broken or otherwise mishapen.
Andy