Control & Rehearsal Room in one?

jeffjazz · Post by **jeffjazz** » Thu Apr 01, 2004 2:49 am

John, I love your forum! Thanks also for your vast info on the sae site.

I am a producer of all kinds of music, mostly through ProTools, and I play in a band. I have a garage 12' x 26' w. vaulted ceilings and my idea is to use it as both a mix room and a live / rehearsal room. If necessary, make it convertible w. some type of hinged traps like the ones used in the piano room of the Left Bank Productions Studio. Also, I was hoping there was room for a small iso booth and a small room for the computers and storage (mac G4 and a PC plus various effects). Use the high ceiling for hangings...

Do you think I'm better off splitting into two small rooms ala garage plan a or b, or do you think my original idea can be executed with professional results?

thanks a ton folks!

Jeff

Post by **John Sayers** » Thu Apr 01, 2004 11:48 pm

maybe make a 5' deep end section that contains a booth and puter box - that would give you a 12 x 21 main room which would make a fine mix/rehearsal room.

cheers
John

jeffjazz · Post by **jeffjazz** » Fri Apr 02, 2004 5:11 pm

Great, John... I was actually thinking the same thing!

Here's my idea for basic components:

Front end: 5' x 12'
Entrance from house
iso booth: 4' x 8' ???
computer rm

Main Room: 12' x 21'
Entrance from front end & outside
Mix area (my zone) 6' x 8' including desk and nearfields
Drum Riser 4' x 8' (filled w. sand??)
Couch 4' x 2'

of course, i'll need to treat acoustically and deal w. hvac, but what do you think about the components? would you go about it differently... say more room for the iso booth, drums or mix area?

Thanks a ton, i'm trying to get a good idea of what can be done here before i draw out some plans!

Jeff

jeffjazz · Post by **jeffjazz** » Fri Apr 02, 2004 5:26 pm

Great, John... I was actually thinking the same thing!

Here's my idea for basic components:

Front end: 5' x 12'
Entrance from house
iso booth: 4' x 8' ???
computer rm

Main Room: 12' x 21'
Entrance from front end & outside
Mix area (my zone) 6' x 8' including desk and nearfields
Drum Riser 4' x 8' (filled w. sand??)
Couch 4' x 2'

of course, i'll need to treat acoustically and deal w. hvac, but what do you think about the components? would you go about it differently... say more room for the iso booth, drums or mix area?

Thanks a ton, i'm trying to get a good idea of what can be done here before i draw out some plans!

Jeff

jeffjazz · Post by **jeffjazz** » Fri Apr 09, 2004 4:45 am

Hi, all! this is a preliminary mockup of the proposed studio - plan 1.
Please give me any feedback or suggestions and thank you!

i'll post plan 2 tonight!
jeff

jeffjazz · Post by **jeffjazz** » Fri Apr 09, 2004 4:51 am

here's the attachment

jeffjazz · Post by **jeffjazz** » Fri Apr 09, 2004 12:37 pm

sorry i'm terrible at these forum postings

please forgive me!

anyway below are the 2 plans that i have so far. i've made them smaller so they fit better in the browser window.

what do ya think?

jeffjazz · Post by **jeffjazz** » Fri Apr 09, 2004 12:38 pm

here's plan 2

Post by **John Sayers** » Fri Apr 09, 2004 3:56 pm

how about something like this??

cheers
john

Oldaudio · Post by **Oldaudio** » Sat Apr 10, 2004 12:09 am

Jeff : I second John's design drawing. I was about to suggest getting those drums out of the control room .
Durff

jeffjazz · Post by **jeffjazz** » Sat Apr 10, 2004 12:37 am

Pretty cool. ala garage studio 2 almost... it looks like it would work great!

would i have to enter or load into the studio through the house?

how would i access the electrical panel in the corner of the control room?

would it work if the schematic was flipped and the door to my house was about 3 feet off the wall in my living room? that wouldnt work for the missus

please see possiblities below (although not to scale, just rough)

BUT where would i put the noisy computers?

thanks!!
jeff

jeffjazz · Post by **jeffjazz** » Sat Apr 10, 2004 12:38 am

sorry here it is