5.1 to 3x SPDIF out

[duki]

Greatings to all.
I am planing to make 5.1 soround sound but all speakers to be active.
I am using in this moment behringer DCX 2496 as crosover and DAC for stereo listeniung and
the sound is ok so I want to have the same sound on all other speakers
(center,sur L,sur R and sub)
The Behriner DCX 2496 using SPDIF and aesebu input(stereo).
My question is how to make a bridge between DTS 5.1 procesor to SPDIF-(3x spdif) from PC
http://www.behringer.com/EN/Products/DCX2496.aspx

[gullfo]

page 28 of the user manual shows a stereo signal split across 6 speakers evenly but if you are looking for multiple 5.1 speaker sets, this is probably not the box to use, or you need to use several of the them.

[duki]

Hi gullfo
Yes I will use 3 Behringers,my problem is how to get 3 spdif outs(3x digital stereo) from the source-PC.
Thanks gullfo

[duki]

I need an idea how to approach this problem,anybody??

[gullfo]

you could use a card which has multiple SPDIF outs? or multiple card using a common clock source?

[duki]

Yes this is wath I need but I can not find somthing like that.
Do you have any sugestion for me?

[gullfo]

i'd check into PCI type boards which have the SPDIF outputs and see if they support being ganged. otherwise consider a 7.1 type card and use analog outputs.

[duki]

Thank you gullfo.