Do I need to change this?

How to use REW, What is a Bass Trap, a diffuser, the speed of sound, etc.

Moderators: Aaronw, sharward

Manfriday
Posts: 18
Joined: Wed Oct 15, 2003 1:36 am
Location: St Charles Illinois

Do I need to change this?

Post by Manfriday »

Ok, so I have been working on my basement studio in my spare time
and took a stab at building some slot resonators. Mobile boxes cuase these things may end up moving at some point.

So I get these things built and put up and then my buddy Bryan tells me "hey. that aint symetrical."
And of course it is NOT.
*sigh*
my question is is this a major deal.. do I need to build new boxes?
As you can see from the pics I got a little better at building them as I went on. the first one is pretty durn ugly. :D

my thinking when building these was that I wanted to make the most use of my space. On the east wall there is a ledge about halfway up.

So I built the three little guys up to the ledge and then I built the one big fella that goes across the top of them. It's like 14 inches deep. I figured a nice deep one would be good at cathin some of that low junk flying about. :)

On the other side I have a box that jsut goes from floor to cieling and is 8 inches deep.

So again, is this differnence in symetry a big deal? should a yank the big box and make everything symetrical?

sorry for my wordy post. I get like that.

http://www.blueroomrecording.net/s1.JPG
http://www.blueroomrecording.net/s2.JPG
http://www.blueroomrecording.net/s3.JPG
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

They look fine to me mate - appears though that they are all the same slot width - maybe some variation in the gaps would broaden the absorption??

how does it sound??

cheers
john
Manfriday
Posts: 18
Joined: Wed Oct 15, 2003 1:36 am
Location: St Charles Illinois

Post by Manfriday »

well, my only basis for compairson is how it sounded before I began all of this. In contrast to the way it sounded before it is awsome. :)

There is a bit of a dip around 120 and a bit of a hump around 400 or so.

There is some variation in the slot width, but perhaps I need to go back and be a little more precise. I should be able to yank one of the smaller slats out of each box and reposition stuff.

thanks for the help!

jason
dymaxian
Senior Member
Posts: 357
Joined: Tue Dec 02, 2003 7:21 am
Location: Madison, Wisconsin

Post by dymaxian »

The look of the place only matters if you want it to.

My studio is ugly as hell, but it sounds good. I'm recording sound, not video, so I don't worry about it much. *snicker*

Kase
www.minemusic.net
Kase
www.minemusic.net

"to hell with the CD sales! Download the MP3s and come to the shows!"
Post Reply