My studio Plan

Hi Guys, i am finally building a studio in my back yard, here is a basic design aswell as the dimensions i will be using, any advice or comments would be greatly appreciated! The dimensions are according to Sepmeyers ratio and the dimensions for each room are 3m x 3.84m x 4.62m

Aloha and welcome to the forum! :D Congrats on your studio build! Any chance you could please:

Edit your profile to include your location. This is very important, because this is a worldwide resource, and as such, material costs and availability vary widely. For example, masonry is cheaper than gypsum in some parts of the globe, whereas it's the exact opposite in other regions.

You'll probably get more of a response by doing so and this will really come in handy two or three posts down the road. It's also part of the forum guidelines. Thanks! :wink: For more info, check out both of these links - http://www.johnlsayers.com/phpBB2/viewtopic.php?t=7572 http://www.johnlsayers.com/phpBB2/viewtopic.php?t=3231 Here are a few quotes from the SAE college site you may want to consider - http://www.saecollege.de/reference_material/index.html

So the first thing you must do is eradicate all the parallel walls in a studio design. I believe that a wall must be at least 12 degrees off parallel to stop parallel wall standing wave interference. That's either one wall at 12 degrees or two walls at 6 degrees each. If you can afford to make the angle bigger, do so. Also you can create angled walls within a rectangular room by adding acoustic treatment.

Also because you don't want rear reflections to interfere it is better to start with a longer front to back dimension than the side to side dimension.

Hope this helps, Aloha 8)