Substantial posts by MOSHWITZ, who started the thread, and by the forum’s most active contributors. 14 of 28 posts are listed.
Page 1
MOSHWITZ, 12 September 2007Hello, First of all i would like to thank john for kicking this design at me ,, and everyone else that has helped, inspired, and put up with all my questions :)…
MOSHWITZ, 13 September 2007Sup? :) OK,,now that the floor was in it was time to start building all the cabinetry. I started off with 17 sheets of 3/4 particle board(and had to get 1 more due to a…
MOSHWITZ, 13 September 2007Sup? Thanks for the comp. bro :) I could have done without all the little dilemmas and the "whew..glad i caught that before I ....." along the way ,and believe me it was…
MOSHWITZ, 16 September 2007SUP :) OK, so now it was time to start insulating.. I stared with the soffit units first, they all got 3in of ridged Fiberglass on every surface and a piece to cover the…
MOSHWITZ, 16 September 2007I did have to have a little help to get some pieces to stay put while i was cutting the next piece to go in, so i used a fine misting of the spray glue we use for custom…
MOSHWITZ, 16 September 2007Now it was time to staple the fabric onto the units. O.K. LISTEN UP,,to these words of wisdom.... In the first pic, you will see a Stanly electric staple gun. DO NOT…
doublehelix, 16 September 2007Wow Moshwicz! Looking great! You have definitely got the knack with the woodwork... something that I don't seem to have the patience for. I got an electric staple gun as…
MOSHWITZ, 18 September 2007Sup? thanks for the comps guys :) kendale,,,,Ya, i could definitely notice that i was in the space between the cabs when i walked into that side of the room, i could…
MOSHWITZ, 18 September 2007while i was doing all of this i was also working like a mad man on other parts, here is the test fit of the speaker faces, and the bottom cab faces, which i cut out of…
MOSHWITZ, 18 September 2007Now i was onto making the next 2 side units, and putting my book cases back in.. The window that the air conditioner sits in, has fabric wrapped insulation between the…
MOSHWITZ, 21 September 2007Sup? :) O.K., by this time my wife was ready for some of this stuff to come back out of the living room, and i was at the point where i could actually oblige her on…
MOSHWITZ, 21 September 2007Now it was time to put in the hangers in the bottom soffit cabs, and get my fans mounted as a little heat insurance for the powered JBL's. ;) also,on the bottom soffit,…
MOSHWITZ, 3 October 2007Sup? Now that its just about done, what i have left at this point is cutting and installing the slats on the side units. I'm gonna use 4 sheets of 3/4 in. Birch plywood…
Page 2
MOSHWITZ, 4 October 2007Sup? thanks for the comps man :D It sounds GREAT as it is, already at the mix point the imaging is razor sharp, to the point i can,,like,,reach out to where the sounds…