Hi, is my first intervention, since a friend recommended to me to visit this page, the study that I want to make is very simple since with a room of control and a small room to record voices and to some group, but almost always he is to an announcer, problem of height I do not have since podria to rise up to 3,90 cm, like that could help me to design my study.
Thank you very much.
this is my plane of situation, I don´t have Neighbors.
recording studio in spain
Originally posted at johnlsayers.com, topic 8375.
help me please,
Aloha and welcome to the forum,
Here's a start - http://www.johnlsayers.com/phpBB2/viewtopic.php?t=7572
Aloha 8)
Hi kendale, the truth is that I have been reading very much for the forum before putting my post, and my problem is that not which would be the best way of distributing the room, because of it I have asked for help, anyway I am grateful for any help. And I congratulate you for taking a web as this one.
do you have any doors or windows in this space? here's one idea. since you have plenty of overhead space you can take advantage of that for trapping. howver because the space is almost square you want to also ensure some of the construction alters the room ratio as well.
Not, I have neither windows nor doors, the plane is of the space that I have to construct, when of with the idea I begin.
The truth is that I like much his design, but had thought about a room of control and a cabin of recording, to record voices, probably dividing the room for the half, what do you think about this? .
I think to make is any smaller would not work well. if you can expand the space - say another 4m x 3m, flip the CR, and make the extra space a iso booth, then you're probably going to have something workable. put the door on the rear side of the CR. entry to the booth also on the side.
hello gullfo, before nothing give you thanks for your time, that would seem to you if it extended one of the parts to 5m?,I have been measuring and I can do it , since all the land is mine, since you would make your distribution? , thinking about recording some small group,
this is the new plane.
if this is not enough, it tell me that measured would need, perhaps it can do something,but it remembers that is studio to make audio postproduction of of films and programs of TV, and occasionally to record groups, reason why it did not want to make it very great, give me your opinion, I listen to you.
best regards.
maybe something like this then with the extra space would work. (i've turned it 90 degrees to make it fit the 700pixel wide restriction - you might want to resize your image in the preious post - crop it would work).
Aloha,
Got it, Glenn. Thanks! :wink: Hey, the new "blueprint" designs are looking good! :D Aloha 8)[/quote]You might want to resize your image in the preious post.
It better this one, this is better. Thank you, I am going to try to quarrel like to soundproof well this type of study, to start it.In the previous plane that you did to me, there were details of soundproofing?
best regards
It better this one, this is better. Thank you, I am going to try to quarrel like to soundproof well this type of study, to start it.In the previous plane that you did to me, there were details of soundproofing?
best regards
:oops: thanks! I think its sometimes easier to see it flat than 3D when you're working out the floor plan. 3D really shines once you have the floor worked out and you want to work on the other details of the space... Darrin - the treatments for the space will pretty much be the same and depending on how much isolation you really need (and if most of your work is mix and voice over) then you need isolation to keep your neighbors happy but I would guess that good sounding rooms are more important. so the bits like hangers, and slat walls, etc all apply to this newer designer. I'll post something in a while to map it out. (in 3D :-))Hey, the new "blueprint" designs are looking good!