Turning On Monitors With Power Strip?

Would it be okay to turn on my monitors with a power strip? Thanks

I have mine in a power conditioner for a year and they still work fine. A friend of mine keeps his hooked up to a grounded, protected Belkin power strip and they work fine too.

It's probably best if you mute the speakers before hitting the amp with power.

bamse wrote:

Would it be okay to turn on my monitors with a power strip? Thanks

Are they the only one ac devices you turn off with at the same time?

I have my monitors, console, synth and computer screens hooked up together on one strip. Only ensuring the master fader is down when switching on/off.

For poewring up, unless you have built-in delayed power on your monitors, you chould turn on everything before the monitors. The opposite for powering down

I'm not so worried about audible "pops" as I turn on the monitors last. It's more about possible spikes and surges. It just feels strange using a $4 dollar power strip to turn on $2500 monitors that might have a more involved powering procedure. The reason I want to use a strip is because the power switches are on the back of the monitors and quite hard to get to. Thanks

Bamse, I see your point. I do a similar thing with my active speakers. I only run PC and peripherals from a UPS. Speakers from their own circuit which is hard wired to a mains switch under my desk. - the only protection I have for the speakers is the dedicated quick blow fuse in switchboard. UPS is not designed for power strips (well mine states NOT to use them off protected circuit) - so that pretty well rules that out for you? I am insured for lightening strikes etc so the health of the speakers it is in the lap of the Gods... Hope this helps a little.

I don't have them hooked up to a UPS.

Most modern monitors go into a "standby" mode after a period of inactivity. The standby mode uses very little electricity. I don't bother turning off monitors anymore.