6 or 12 degrees?

Started by OzNimbus on 25 February 2003. 5 replies. In the Library under Control room design.

Originally posted at johnlsayers.com, topic 79.

OzNimbus25 February 2003#1

Just curious on the control room side wall angles.... On the SAE site, it specifies 6 degree side walls, yet in a great number of plans, I see anywhere from 12-20 degree side walls... what gives?

John Sayers26 February 2003#2

depends on the space you have - 6 degrees is the minimum 12 is is the preferred ;) cheers john

simonstav27 February 2003#3

depends on the space you have - 6 degrees is the minimum 12 is is the preferred

Does this also apply for ceilings? Regards Simon

John Sayers27 February 2003#4

simon - I prefer more than 6 for ceilings if possible. I've had pinging with 6. cheers john

charoo3 March 2003#5

hey John! in lots' of studio section offering by your site and other, i have found that ceiling construction is quiet hut style or we can say a bit triangular, i think thats' the great situation as its' breaking parellel nature of ceiling too. iS there any more technical aspect related with same. luv charoo

John Sayers3 March 2003#6

hey charoo - is that avatar you?? cheers JOhn