Key posts: How I built my vocal booth (step-by-step w/pics)

Substantial posts by John Shryock, who started the thread, and by the forum’s most active contributors. 9 of 17 posts are listed.

Page 1

• John Shryock, 17 October 2006Okay... here's how I built my vocal booth. Now, I built the vocal booth about a year ago, and I am just getting to writing this post. I tore down the vocal booth over…
• John Shryock, 17 October 20066. You can see here the drywall on the backside of two of the frames, on their sides next to my current room's walls. However, in the frame where the window will be…
• John Shryock, 17 October 200611. Close up view of the insulation, double drywall, window frame, and 2x6 piece the window rested on. The drywall had to be cut so that it lined up nicely with the…
• John Shryock, 17 October 200616. More insulation is being put up. 17. We are mudding and taping over the cornerbead and nail spots. The better job you do with the tape and mud, the better the paint…
• John Shryock, 17 October 200619. A shot of our hinges. To install the hinges, you must indent the wood of both the door and the frame. The was done using a chisel and a hammer (surprisingly…
• John Shryock, 17 October 200622. More mud, taping. 23. Smoothing out the inner door frame. 24. Now, what to do about the bottom of the door? I bought a little thing that screwed to the bottom of the…
• John Shryock, 17 October 200626. On the far side of the wall on which the door is hung, I drilled out a hole to run some cables through. I had some XLR's, quarter inch, headphone, A/V RCA, a power…
• John Shryock, 17 October 200631. Even though you've already seen it in the threshold picture, this is how the vinyl flooring I put down works. It's cheap, sticks to the floor, and looked very nice.…
• John Shryock, 17 October 200636. Here's a shot looking in on the booth, after I put a bunch of foam up. 37. This is the booth in its finished condition. Overall, useful for me and impressive to…